vineri, 28 iunie 2013

Radio FM cu TEA5767 si... Arduino (II)

   Fata de partea I, in care am prezentat date generale si am comandat integratul TEA5767 cu placa Arduino si am afisat date pe un LCD cu 16 coloane si 2 randuri, apoi pe unul compatibil Nokia 5110, acum voi conectata si modulul de timp real (RTC) cu integratul DS1307, astfel incat voi avea si informatii despre ora si data.


   Dupa ce am modificat un pic sketch-ul anterior pentru a muta informatiile legate de frecventa radio, am urmatoarea prezentare:
  Am completat sketch-ul cu partea de RTC, obtinand:
/*********************************************************************
This is an example sketch for our Monochrome Nokia 5110 LCD Displays
  Pick one up today in the adafruit shop!
These displays use SPI to communicate, 4 or 5 pins are required to
interface
Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing
products from Adafruit!
Written by Limor Fried/Ladyada  for Adafruit Industries.
BSD license, check license.txt for more information
All text above, and the splash screen must be included in any redistribution
*********************************************************************/
// Nokia 5110 LCD (PCD8544) from https://code.google.com/p/pcd8544/

/* niq_ro ( http://nicuflorica.blogspot.ro ) case for Nokia 5110 LCD (PCD8544) - LPH 7366:
 For module from China, you must connect like this:
* Pin 1 (RST) -> Arduino digital 6 (D6)
* Pin 2 (CE) -> Arduino digital 7 (D7)
* Pin 3 (DC) -> Arduino digital 5 (D5)
* Pin 4 (DIN) -> Arduino digital 4 (D4)
* Pin 5 (CLK) - Arduino digital 3 (D3)
* Pin 7 (LIGHT) -> +5V thru 56-100 ohms resistor (for permanent lights) or... other pin control
* Pin 8 (GND) -> GND1 or GND2 
*/

// Date and time functions using a DS1307 RTC connected via I2C and Wire lib
// original sketck from http://learn.adafruit.com/ds1307-real-time-clock-breakout-board-kit/

// adapted sketch by niq_ro from http://nicuflorica.blogspot.ro
// version 4.0 for FM radio with TEA5767 - http://www.tehnic.go.ro

#include <Adafruit_GFX.h>
#include <Adafruit_PCD8544.h>
// Adafruit_PCD8544 display = Adafruit_PCD8544(SCLK, DIN, DC, CS, RST);
Adafruit_PCD8544 display = Adafruit_PCD8544(3, 4, 5, 7, 6);

#include <TEA5767.h>
#include <Wire.h>
#include <Button.h>

// TEA5767 begin
TEA5767 Radio;
double old_frequency;
double frequency;
int search_mode = 0;
int search_direction;
unsigned long last_pressed;

Button btn_forward(11, PULLUP);
Button btn_backward(12, PULLUP);
// TEA5767 end

#include "RTClib.h"
RTC_DS1307 RTC;

void setup () {

  Wire.begin();
  Radio.init();
  Radio.set_frequency(104.5); 
  Serial.begin(9600);

  display.begin();
  // init done

  // you can change the contrast around to adapt the display
  // for the best viewing!
  display.setContrast(60);
  display.clearDisplay();

RTC.begin();
// RTC.adjust(DateTime(__DATE__, __TIME__));
// if you need set clock... just remove // from line above this

// part code for flashing LED
Wire.beginTransmission(0x68);
Wire.write(0x07); // move pointer to SQW address
Wire.write(0x10); // sends 0x10 (hex) 00010000 (binary) to control register - turns on square wave
Wire.endTransmission();

  if (! RTC.isrunning()) {
    Serial.println("RTC is NOT running!");
    // following line sets the RTC to the date & time this sketch was compiled
    RTC.adjust(DateTime(__DATE__, __TIME__));
  }

  // Print a logo message to the LCD.
  display.setTextSize(1);
  display.setTextColor(BLACK);
  display.setCursor(8,0);
  display.println("tehnic.go.ro");
  display.setCursor(20, 8);
  display.print("& niq_ro");
  display.setCursor(16, 24);
  display.print("radio FM");  
  display.setCursor(5, 32);
  display.print("si ceas/data");
  display.setCursor(0, 40);
  display.print("versiunea ");
  display.setTextColor(WHITE, BLACK);
  display.print("4.0");
  display.display();
  delay (5000);
  display.clearDisplay(); 

}

void loop () {
  
  DateTime now = RTC.now();
  unsigned char buf[5];
  int stereo;
  int signal_level;
  double current_freq;
  unsigned long current_millis = millis();
  
  if (Radio.read_status(buf) == 1) {
    current_freq =  floor (Radio.frequency_available (buf) / 100000 + .5) / 10;
    stereo = Radio.stereo(buf);
    signal_level = Radio.signal_level(buf);

   display.setTextSize(2);
   display.setTextColor(BLACK);

  if (current_freq >=100)
   display.setCursor(0,16);
else
   display.setCursor(12,16);
   display.print(display.print(current_freq));

// erase 2 number from right
   for (int x = 16; x < 30; x++)
   { 
   display.drawLine(60, x, 84, x, WHITE);
   }

   display.setTextSize(1);
   display.setCursor(65,19);
   display.print("MHz");

   display.setCursor(0,35);
   display.setTextSize(1);
   display.setTextColor(WHITE, BLACK);
   if (stereo) display.print("STEREO"); else display.print("MONO");
   
   display.display();
   delay (500);
   display.clearDisplay(); 

// draw a signal level triangle...
   display.drawLine(80, 30, 80, 45, BLACK);
   display.drawLine(80, 45, 50, 45, BLACK);
   display.drawLine(50, 45, 80, 30, BLACK);
// draw an antenna
   display.drawLine(55, 32, 55, 40, BLACK);
   display.drawLine(56, 32, 56, 40, BLACK);
   display.drawLine(52, 32, 55, 36, BLACK);
   display.drawLine(51, 32, 55, 37, BLACK);
   display.drawLine(59, 32, 56, 36, BLACK);
   display.drawLine(60, 32, 56, 37, BLACK);
    

int sl = signal_level;
   for (int x = 0; x < sl; x++)
   { 
   display.drawLine(50+2*x, 45, 50+2*x, 45-x, BLACK);
   }


  }
  
  if (search_mode == 1) {
      if (Radio.process_search (buf, search_direction) == 1) {
          search_mode = 0;
      }
  }
  
  if (btn_forward.isPressed()) {
    last_pressed = current_millis;
    search_mode = 1;
    search_direction = TEA5767_SEARCH_DIR_UP;
    Radio.search_up(buf);
    delay(300);
  }
    
  if (btn_backward.isPressed()) {
    last_pressed = current_millis;
    search_mode = 1;
    search_direction = TEA5767_SEARCH_DIR_DOWN;
    Radio.search_down(buf);
    delay(300);
  } 
   delay(100);


   // need for display time 
   int zs = now.second()/10;
   int us = now.second() - zs*10;
  
  if (us > 2 )
 {
   display.setTextSize(2);
   display.setTextColor(BLACK);
   display.setCursor(0, 0);
   
   
   {   if ( now.hour() < 10)
   {
     display.print(" "); 
     display.print(now.hour(), DEC);
   }
   else
   {
     display.print(now.hour(), DEC);
   }
   display.setCursor(20, 0);
   display.print(":");
   display.setCursor(28, 0);
   if ( now.minute() < 10)
   {
     display.print("0"); 
     display.print(now.minute(), DEC);
   }
   else
   {
   display.print(now.minute(), DEC);
   }

   display.setCursor(48, 0);
   display.print(":");
   display.setCursor(57, 0);
   if ( now.second() < 10)
   {
     display.print("0"); 
     display.print(now.second(), DEC);
   }
   else
   {
   display.print(now.second(), DEC);
   }
   }
 }
 else 
 {
   display.setTextSize(1);
   display.setTextColor(BLACK);
   display.setCursor(16, 0);
   if ( now.hour() < 10)
   {
     display.print(" "); 
     display.print(now.hour(), DEC);
   }
   else
   {
   //  display.setCursor(16, 0);
     display.print(now.hour(), DEC);
   }
   display.print(":");
   if ( now.minute() < 10)
   {
     display.print("0"); 
     display.print(now.minute(), DEC);
   }
   else
   {
   display.print(now.minute(), DEC);
   }
   display.print(":");
   if ( now.second() < 10)
   {
     display.print("0"); 
     display.print(now.second(), DEC);
   }
   else
   {
   display.print(now.second(), DEC);
   }
      
   display.setCursor(10, 8);
   if ( now.day() < 10)
   {
     display.print("0"); 
     display.print(now.day(), DEC);
   }
   else
   {
   display.print(now.day(), DEC);
   }
   display.print("/");
   if ( now.month() < 10)
   {
     display.print("0"); 
     display.print(now.month(), DEC);
   }
   else
   {
   display.print(now.month(), DEC);
   }
   display.print("/");
   display.print(now.year(), DEC);
 }

}

   Filmuletul, care prezinta, ce am scris mai sus, se numeste FM radio with TEA5767 and Arduino (III):
29.iun.2013
   Am mai facut un filmulet, numit FM radio with TEA5767 and Arduino (IV)

PS: Am conectat si senzorul DHT11 si am informatii despre temperatura si umiditate, dar pare prea "sorcova", asa ca nu am mai "bibilit" la sketch prea mult...
/*********************************************************************
This is an example sketch for our Monochrome Nokia 5110 LCD Displays
  Pick one up today in the adafruit shop!
  ------> http://www.adafruit.com/products/338
These displays use SPI to communicate, 4 or 5 pins are required to
interface
Adafruit invests time and resources providing this open source code,
please support Adafruit and open-source hardware by purchasing
products from Adafruit!
Written by Limor Fried/Ladyada  for Adafruit Industries.
BSD license, check license.txt for more information
All text above, and the splash screen must be included in any redistribution
*********************************************************************/
// Nokia 5110 LCD (PCD8544) from https://code.google.com/p/pcd8544/

/* niq_ro ( http://nicuflorica.blogspot.ro ) case for Nokia 5110 LCD (PCD8544) - LPH 7366:
 For module from China, you must connect like this:
* Pin 1 (RST) -> Arduino digital 6 (D6)
* Pin 2 (CE) -> Arduino digital 7 (D7)
* Pin 3 (DC) -> Arduino digital 5 (D5)
* Pin 4 (DIN) -> Arduino digital 4 (D4)
* Pin 5 (CLK) - Arduino digital 3 (D3)
* Pin 6 (Vcc) -> +5V thru adaptor module (see http://nicuflorica.blogspot.ro/2013/06/afisajul-folosit-la-telefoanele-nokia.html )
* Pin 7 (LIGHT) -> +5V thru 56-100 ohms resistor (for permanent lights) or... other pin control
* Pin 8 (GND) -> GND1 or GND2 
*/

// Date and time functions using a DS1307 RTC connected via I2C and Wire lib
// original sketck from http://learn.adafruit.com/ds1307-real-time-clock-breakout-board-kit/
// add part with SQW=1Hz from http://tronixstuff.wordpress.com/2010/10/20/tutorial-arduino-and-the-i2c-bus/

// adapted sketch by niq_ro from http://nicuflorica.blogspot.ro
// version 4.1 for FM radio with TEA5767 - http://www.tehnic.go.ro

#include <Adafruit_GFX.h>
#include <Adafruit_PCD8544.h>
// Adafruit_PCD8544 display = Adafruit_PCD8544(SCLK, DIN, DC, CS, RST);
Adafruit_PCD8544 display = Adafruit_PCD8544(3, 4, 5, 7, 6);

#include <TEA5767.h>
// from https://github.com/andykarpov/TEA5767
#include <Wire.h>
#include <Button.h>
// from http://arduino-info.wikispaces.com/file/view/Button.zip/405390486/Button.zip

// TEA5767 begin
TEA5767 Radio;
double old_frequency;
double frequency;
int search_mode = 0;
int search_direction;
unsigned long last_pressed;

Button btn_forward(11, PULLUP);
Button btn_backward(12, PULLUP);
// TEA5767 end

#include <DHT.h>
#define DHTPIN A2     // what pin we're connected DHT11
#define DHTTYPE DHT11   // DHT 11 
DHT dht(DHTPIN, DHTTYPE);

#include "RTClib.h"
RTC_DS1307 RTC;

void setup () {

  Wire.begin();
  Radio.init();
  Radio.set_frequency(104.5); 
  Serial.begin(9600);

 // sensor DHT for humidity and temperature 
  dht.begin();
  display.begin();
  // init DHT done

  // you can change the contrast around to adapt the display
  // for the best viewing!
  display.setContrast(55);
  display.clearDisplay();

RTC.begin();
// RTC.adjust(DateTime(__DATE__, __TIME__));
// if you need set clock... just remove // from line above this

// part code for flashing LED
Wire.beginTransmission(0x68);
Wire.write(0x07); // move pointer to SQW address
// Wire.write(0x00); // turns the SQW pin off
 Wire.write(0x10); // sends 0x10 (hex) 00010000 (binary) to control register - turns on square wave at 1Hz
// Wire.write(0x13); // sends 0x13 (hex) 00010011 (binary) 32kHz

Wire.endTransmission();

  if (! RTC.isrunning()) {
    Serial.println("RTC is NOT running!");
    // following line sets the RTC to the date & time this sketch was compiled
    RTC.adjust(DateTime(__DATE__, __TIME__));
  }

  // Print a logo message to the LCD.
  display.setTextSize(1);
  display.setTextColor(BLACK);
  display.setCursor(8,0);
  display.println("tehnic.go.ro");
  display.setCursor(20, 8);
  display.print("& niq_ro");
  display.setCursor(16, 24);
  display.print("radio FM");  
  display.setCursor(5, 32);
  display.print("si ceas/data");
  display.setCursor(0, 40);
  display.print("versiunea ");
  display.setTextColor(WHITE, BLACK);
  display.print("4.1");
  display.display();
  delay (5000);
  display.clearDisplay(); 

}

void loop () {
  
  DateTime now = RTC.now();
  unsigned char buf[5];
  int stereo;
  int signal_level;
  double current_freq;
  unsigned long current_millis = millis();
  
  if (Radio.read_status(buf) == 1) {
    current_freq =  floor (Radio.frequency_available (buf) / 100000 + .5) / 10;
    stereo = Radio.stereo(buf);
    signal_level = Radio.signal_level(buf);

   display.setTextSize(2);
   display.setTextColor(BLACK);

  if (current_freq >=100)
   display.setCursor(0,16);
else
   display.setCursor(12,16);
   display.print(display.print(current_freq));

// erase 2 number from right
   for (int x = 16; x < 30; x++)
   { 
   display.drawLine(60, x, 84, x, WHITE);
   }

   display.setTextSize(1);
   display.setCursor(65,16);
   display.print("MHz");

   display.setCursor(65,24);
   display.setTextSize(1);
   display.setTextColor(WHITE, BLACK);
   if (stereo) display.print("ST"); else display.print("  ");

  // read value from DHT sensor
  int h = dht.readHumidity();
  int t = dht.readTemperature();

   display.setTextColor(BLACK);
   display.setCursor(6,32);
   display.setTextSize(1);
   display.print(h);
   display.print("%H");
   display.setCursor(0,40);
   display.setTextColor(WHITE, BLACK);
   display.print("+");
   display.print(t);
   display.print("^C ");

   
   display.display();
   delay (500);
   display.clearDisplay(); 

// draw a signal level triangle...
   display.drawLine(80, 30, 80, 45, BLACK);
   display.drawLine(80, 45, 50, 45, BLACK);
   display.drawLine(50, 45, 80, 30, BLACK);
// draw an antenna
   display.drawLine(55, 32, 55, 40, BLACK);
   display.drawLine(56, 32, 56, 40, BLACK);
   display.drawLine(52, 32, 55, 36, BLACK);
   display.drawLine(51, 32, 55, 37, BLACK);
   display.drawLine(59, 32, 56, 36, BLACK);
   display.drawLine(60, 32, 56, 37, BLACK);
    

int sl = signal_level;
   for (int x = 0; x < sl; x++)
   { 
   display.drawLine(50+2*x, 45, 50+2*x, 45-x, BLACK);
   }


  }
  
  if (search_mode == 1) {
      if (Radio.process_search (buf, search_direction) == 1) {
          search_mode = 0;
      }
  }
  
  if (btn_forward.isPressed()) {
    last_pressed = current_millis;
    search_mode = 1;
    search_direction = TEA5767_SEARCH_DIR_UP;
    Radio.search_up(buf);
    delay(300);
  }
    
  if (btn_backward.isPressed()) {
    last_pressed = current_millis;
    search_mode = 1;
    search_direction = TEA5767_SEARCH_DIR_DOWN;
    Radio.search_down(buf);
    delay(300);
  } 
   delay(100);


   // need for display time 
   int zs = now.second()/10;
   int us = now.second() - zs*10;
  
  if (us > 2 )
 {
   display.setTextSize(2);
   display.setTextColor(BLACK);
   display.setCursor(0, 0);
   
   
   {   if ( now.hour() < 10)
   {
     display.print(" "); 
     display.print(now.hour(), DEC);
   }
   else
   {
     display.print(now.hour(), DEC);
   }
   display.setCursor(20, 0);
   display.print(":");
   display.setCursor(28, 0);
   if ( now.minute() < 10)
   {
     display.print("0"); 
     display.print(now.minute(), DEC);
   }
   else
   {
   display.print(now.minute(), DEC);
   }

   display.setCursor(48, 0);
   display.print(":");
   display.setCursor(57, 0);
   if ( now.second() < 10)
   {
     display.print("0"); 
     display.print(now.second(), DEC);
   }
   else
   {
   display.print(now.second(), DEC);
   }
   }
 }
 else 
 {
   display.setTextSize(1);
   display.setTextColor(BLACK);
   display.setCursor(16, 0);
   if ( now.hour() < 10)
   {
     display.print(" "); 
     display.print(now.hour(), DEC);
   }
   else
   {
   //  display.setCursor(16, 0);
     display.print(now.hour(), DEC);
   }
   display.print(":");
   if ( now.minute() < 10)
   {
     display.print("0"); 
     display.print(now.minute(), DEC);
   }
   else
   {
   display.print(now.minute(), DEC);
   }
   display.print(":");
   if ( now.second() < 10)
   {
     display.print("0"); 
     display.print(now.second(), DEC);
   }
   else
   {
   display.print(now.second(), DEC);
   }
      
   display.setCursor(10, 8);
   if ( now.day() < 10)
   {
     display.print("0"); 
     display.print(now.day(), DEC);
   }
   else
   {
   display.print(now.day(), DEC);
   }
   display.print("/");
   if ( now.month() < 10)
   {
     display.print("0"); 
     display.print(now.month(), DEC);
   }
   else
   {
   display.print(now.month(), DEC);
   }
   display.print("/");
   display.print(now.year(), DEC);
 }

}
   Schema de conectare devine: